Product Description

1) Install the BIRD/MONKEY REPELLER at least 8 + ft (Depend upon the height of the work place) above the floor & corner side of the Shade or surrounding the problem area (Higher height is preferable for batter sound spreading) 2) Plug in the remote cord in the jack & fix the remote at a place where your hand can reach. Plug in the power cord to **0A/C main & keep the BIRD/MONKEY REPELLER ON *4 hrs (round the clock continuously). 3) When you first install �ULTRASONIC BIRD/MONKEY REPELLER� turn the black knob in the REMOTE fully to the left or to the right. It adjusts the sweep rate fast / slow. 4) After 3 to 4 weeks change the position of the black knob a bit in opposite direction. There is a black switch in the remote; the position of it at one side test other is normal. In test position you can hear loud audio able sound. You can use it while adjusting the black knob. You can keep test switch at test position (normaly kept at ultra sonic) when men are not at around, (This also functions well. ) but never SWITCH OFF the equipment. 5) Action starts after few days & in 4 to 6 weeks the infestation should be over. 6) A) Do not face Ultrasonic BIRD/MONKEY Repeller towards Soft or carpet surface b) Do not face place Ultrasonic BIRD/MONKEY Repeller behind any object / furniture, draperies or other soft objects. c) Do not place Ultrasonic BIRD/MONKEY Repeller next to your ear. d) Do not use outdoor. (Use at enclosure out of reach for the animal.) e) Do not let the unit come in contact with water. (Keep the unit away from water contact). 7) If you (change The Position of the black knob within 3 to 4 weeks then OK) 8) If you forget to change the position of the black knob for more than 6 or more weeks then put OFF the REPELLER for 4 to 6 weeks and again plug in and please FOLLOW the INSTRUCTION strictly.